Revolutionary Plastic Recycling Water Treatment and Reuse System
Pet bottle washing processing will make lot of wastewater, Main pollutants are suspended matter.According to the wastewater amount and pollutants index. Building a set water treatment system is planned.Adopted filtration + sedimentation + air flotation process, After the wastewater is treated, part will be reused, and part will be discharged up to standard.
Design principles
1.According to the sewage quality and treatment requirements, the process route shall be reasonably selected, the treatment technology shall be advanced, and the treated water quality shall meet the discharge standard.
2. On the premise of meeting the treatment requirements, the original facilities shall be used as much as possible to reduce the investment, and the requirements for beauty in the plant shall be considered.
3. Convenient operation and management, simple operation and simple maintenance. The equipment and equipment are of high quality, good performance and stable operation.
Design parameters
1.Waste water source
Plastic recycling plants
2.Designed treatment capacity:12m³/H
3.Efluent quality
| Item |
SS(Suspended Substance) |
PH |
| Inflow quality |
<1000 |
7-14 |
| Efluent quality |
<100 |
6-9 |
Treatment technology
process flowchart
For our water treatment system, The main purpose is to remove suspended matter from wastewater. Adopted filtration + sedimentation + air flotation treatment process
Process flowchart as following:
layout chart:
1.Process Description
The wastewater from the washing line is first discharged to the wastewater collection pool for collection and temporary storage;
Step 1: the wastewater conveyor to the vibrating screen for solid-liquid separation by the water pump, the larger particles into the slag collection box, and the wastewater into the sedimentation tank;
Step 2: After the wastewater into the sedimentation tank, According to the online PH meter feedback date, automatically added acid and adjust the PH index to neutral, then added flocculant and coagulants to the flocculation reaction.
Most of the condensed flocs will sink, and the clear water will float up and into the air flotation tank to realize the separation of mud and water, and the mud water will be discharged to the sludge tank regularly;
Step 3:Clear water into the air flotation tank, and when compressed air is mixed with water, micro-bubbles are produced, The residual fine particles and the floating matter will float to the surface of the pool by the air bubbles, then, are discharged through the scraper device; After treatment the clean water into the water pool temporary storage.
Step 4: Clean water will be conveyor to the filter by the High-pressure pump and filtered water goes back to the washing line.
The sludge produced by the sedimentation tank and air flotation into the sludge tank, and dewatered by the sludge dewatering device and then transported out for treatment regularly.
2.Main Process introduction:
a.Wastewater collection tank(prepared by customer)
It is mainly used to collect the cleaning wastewater discharged from the cleaning line, and also serves as the sump of the sewage lift pump, which has the functions of buffering the flow change, regulating the water volume, and homogenizing the water quality.
Design stay time:≮2h
Integrated waste water collection pool*1set,Effective volume:40m³
Material:Concrete
Form:Underground
b.Lift pump
It is used to lift the sewage to the sedimentation tank for treatment. The design adopts non-blocking submersible sewage pump, which is easy to install and maintain, and has a long service life. The automatic start and stop can be realized through the level gauge set in the regulating tank, reducing manual operation.
Integrated waste water lifting pump*2set(One for use, the other for backup)
Power:5.5kw
c.vibrating screen
The circular vibrating screen is set at the forefront of the water treatment system, mainly to separate the larger particles in the discharged wastewater, which is beneficial to the subsequent sedimentation treatment and reduces the blockage and wear of subsequent equipment.
Model:YZS1500*1set
Main Materail:SUS304
304 collection box*1
d.Integrated sedimentation tank
The integrated sedimentation tank adopts inclined tube sedimentation tank, which is set at the front end of the treatment system. By adding acid, the PH of wastewater is adjusted to neutral, providing the best conditions for subsequent sedimentation reaction. In this process, the PH set in the reaction tank is interlocked with the acid dosing metering pump to realize the automatic adjustment of PH.
At the same time, by adding flocculants and coagulants, SS in the wastewater can be coagulated and settled, and mud and water can be separated by gravity, so as to clarify the water quality.
Processing capacity:20m³/h 1set
External dimensions:L11000*W2000*H3500
Material:Carbon steel + anti-corrosion
Mud discharge:The mud discharge valve is an electric valve, which automatically discharges mud regularly
The wastewater after sedimentation treatment will still contain a small amount of floating substances, which need to enter the air flotation tank for further treatment. Air floatation is the dissolved water produced by the dissolved gas system, which is released into the water through rapid decompression to produce a large number of tiny bubbles. Several bubbles adhere to the suspended solids or oil surface in the water, forming suspended solids with an overall density of less than 1. The solid and liquid are separated by buoyancy to make the water completely clear.
Processing capacity:20m³/h 1set
Material:Carbon steel + anti-corrosion
External dimensions:L5000*B1500*H2100
Scum pump:Pneumatic Diaphragm Pump*2set S1FM
f. Clean water tank
It is mainly used to collect the treated recycled water and also serve as the reservoir for the clean water pump.
Design stay time:2h
Effective volume:40m³
Material:carbon steel anticorrosion
Dimensions: L4000*W2000*H1500 2set
g.Clean water pump
It is used to reuse the treated recycled water to the cleaning line. The design adopts vertical centrifugal pump, which is easy to install and maintain, and has a long service life. High level alarm and low level pump stop can be realized through the level gauge set in the regulating tank.
Qty.:2set(One for use, the other for backup)
Power:5.5kw
h.Filter
The treated wastewater is deeply filtered and adopts quartz sand as the filter material, the water flows through the internal water distributor and water collector, and high-speed filtration is performed in the tank, which can effectively remove particulate matter and reduce turbidity.
Qty.:1set
Model:DMF3224-1A
Material:carbon steel anticorrosion
i.Dosing System
The dosing device is composed of metering pump, reagent barrel, agitator, etc., and is used to realize the quantitative dosing of reagent. Among them, PAC is a flocculant with strong bridging adsorption performance, which can coagulate and adsorb with suspended solids in water, so as to destabilize and settle the suspended solids; Anionic PAM is a coagulant, which can be used in combination with flocculant to improve the sedimentation of flocs and facilitate the clarification of water quality; Cationic PAM is used for sludge dewatering, which is conducive to solid-liquid separation. The automatic acid dosing device is used to adjust the PH of wastewater to be neutral, and the automatic dosing is realized through the online PH device.
Qty.:4set
PAM Automatic dosing device:2set Three box type automatic, 304 1000L
PAC Automatic dosing device:1set Double bucket double pump PE 2000L
Automatic acid dosing device:1set Single bucket double pump PE 500L
j.Sludge treatment system
The sludge treatment system consists of sludge thickener, diaphragm pump and filter press
The sludge thickening tank is used to store the sludge produced by the physical and chemical reaction of the sedimentation tank and the air flotation tank. The sludge is transported to the filter press through the sludge pump for dehydration, and the dewatered sludge is transported outward for treatment;
sludge pool*1set:Underground-type concrete structure,volume10m³(Customer provide)
sludge pump:Pneumatic Diaphragm Pump*2set S1FM
Stamped screw machine:model 301,design and processing capacity:20-70kg.DS/h
Material:304
Equipment size:L3340*B970*H182500
Power:0.95kw
Qty.:1set
YOU ARE WELCOME TO OUR FACTORY AT ANY TIME
* ACERETECH is original manufacturer.
* If you interested in our products and we can fulfill your request , you may pay a visit to ACERETECH Factory.
* The meaning of visiting supplier, since seeing is believing, ACERETECH Machinery with own manufacture and developed& research team, we can send you engineers and make sure the high efficiency after-sales service.
SEE ACERETECH MACHINE HOW TO ENSURE THE QUALITY* In order to ensure the accuracy of each part, we are equipped with a variety of professional processing equipment and we have accumulated professional processing methods over the past years.* Each component before assembly needs strict control by inspecting personnel.
* Each assembly is in charge by a master who has working experience for more than 15 years
* After all the equipment are completed, we will connect all the machines and run the full production line for at least 12 hours to ensure the stable running in customers' factory
THE AFTER-SALE SERVICE OF ACERETECH MACHINERY* After finishing the production, we will debug the production line, take photos, videos and send them to customers via mail or instant tools.* After the commissioning, we will package the equipment by the standard export package for shipment.
* According to the customer's request, we can arrange our engineers to customers' factories to do the installation and training.
* Engineers, sales managers, and after-sales service managers will form an after-sales team, online and offline, to follow the customers' project.
){kind=link}